Rails Are The Main Component Of Railway Tracks

 Light steel Rail is the main component of the railway track, it must ensure the continuity of the railway track and the quality of the rail itself. In order to ensure the normal operation of the railway and the person of the passenger, the waste steel rail must be replaced in time.

The formation of Heavy Steel Rail contact fatigue damage can be roughly divided into three stages: the first stage is the change in the shape of the rail tread, such as irregularities in the rail tread, and saddle wear at the welds. These irregularities will increase the wheel to the rail The second stage is the destruction of the metal on the surface of the rail head. Due to the cold hardening of the metal on the rail head tread surface, the hardness of the working surface of the rail head continues to increase.

 

Welding Q345B angle steel with strong adaptability to the base metal composition and low C, S, P content is used. The formed weld metal C, S has a lower content, a higher weld Mn / S ratio, and a higher Mn / Si ratio. It has strong ability to generate and propagate heat cracks, and root out the welding heat cracks of Q345B angle steel from metallurgical measures. The moderate yield ratio increases the reliability of the weld, and the weld stress does not easily rise to the strength limit and causes failure.

 Light Steel Rail

Light Steel Rail

Correctly control the preheating temperature and interlayer temperature before welding. The preheating temperature is controlled at 150-200°C and the interlayer temperature is controlled at 150-300°C. This reduces the strain rate of the weld Q345B angle steel during solidification and reduces the welding heat input. Increase the welding speed to reduce the degree of crystal segregation.

 

Rail steel should be a high-strength low-alloy weathering steel. It also has a special performance requirement, which is a small thermal expansion coefficient. This is the current situation of high-speed driving. In order to reduce the collision and wear between wheel and rail, the length of the rail is longer than the old style. The rails are much longer, and the longer the rails are, the longer the spacing between the joints is, the longer the spacing will be, which makes it more difficult to drive.

 

H-beams are economical-cutting steels (others include cold-formed thin-walled steels, profiled steel plates, etc.). Due to the reasonable cross-sectional shape, they can make steels more effective and improve cutting capacity.

 

The above are the main components of the railway track introduced by 43kg Heavy Rail Manufacturer. I hope to help you.

评论

发表评论

此博客中的热门博文

Steelmaking Process (2)

图片
8. Refining period: The process of steelmaking is carried out by slagging and other methods to remove some elements and compounds that are harmful to the quality of steel by chemical reaction into the gas phase or discharged into the slag to remove it from the molten steel. period. 9. Reduction period: In the ordinary power electric arc furnace steelmaking operation, the time from the completion of the slag slag to the tapping is usually called the reduction period. 10. Furnace refining: The steelmaking process of refining the molten steel in the steelmaking furnace (converter, electric furnace, etc.) to another vessel for refining, also called secondary metallurgy. The steelmaking process is therefore divided into two steps: primary refining and refining. 11. Steel liquid agitation: Stirring of molten steel through refining beyond the furnace. It homogenizes the molten steel composition and temperature and boosts metallurgical reactions. Most metallurgical reaction procedures a...
阅读全文

Crane rail installation - Standards and procedures

图片
   Introduction to crane track installation With the rapid development of modern logistics, greater demands are being placed on the logistics management of machinery and equipment. This is not just about transporting bits. Once heavy machinery or equipment has arrived at a facility, it also needs to be picked up, moved and set up appropriately. For these purposes, cranes come in very handy. As cranes play an important role, crane track installation also plays an important role in these industries.  Crane track installation Techniques and standards The accurate installation of crane rails is a primary requirement for this type of heavy machinery and related industries. Selecting the most suitable track and securing it is a key issue in ensuring the integrity and longevity of the crane track system. At Yongyang , we have a reliable, skilled and experienced team to help you find the more suitable crane rails. But more on that later. Now let's talk more about crane rail inst...
阅读全文

Standard Rail: Railcar Repair | Railcar Storage | Transloading

图片
Standard Rail   is at the forefront of innovation in the railway industry, offering comprehensive solutions for railcar repair, storage, and transloading. With a commitment to excellence and efficiency, Standard Rail provides state-of-the-art facilities and expert services to meet the diverse needs of its customers.  Railcar Repair Services: Standard Rail specializes in providing top-notch railcar repair services to ensure the safety, reliability, and compliance of railcars. Its certified technicians and state-of-the-art facilities offer a wide range of repair and maintenance solutions, including: Mechanical Repairs: Comprehensive mechanical repairs for railcar components such as wheels, brakes, couplers, and suspension systems. Structural Repairs: Welding, fabrication, and structural repairs to address damage or wear on railcar bodies, frames, and undercarriages. Tank Car Services: Specialized services for tank cars, including cleaning, inspection, lining, and pressure testin...
阅读全文