Where To Buy Slotted Angle Bar Singapore?

When we use the Angle bar in industrial production, where can we buy the Angle bar cheaply? You need to know that our factory produces Angle bar with good quality and favorable price.

Angle bar

Angle bar
Angle bar, commonly known as Angle iron, is perpendicular to each other on both sides of the long steel bar. Angle steel is carbon structural steel used in construction. It is a type of steel with a simple section, mainly used for metal components and the frame of the workshop. Good weldability, plastic deformation performance, and certain mechanical strength are required in use. The raw material billet for Angle steel production is low carbon square billet, and the finished Angle steel is delivered in the form of hot rolling, normalizing, or hot rolling.

Said method

The specification of the width * width * side thickness of the mm number such as 50*50*5 can also be expressed as 5# Angle steel since the long shape sometimes followed by the length of equilateral Angle steel through length is 2-4 good length 3-3m; 5-8 length 4-12m; 9-4, 4-19 m long; 16-20 length 6-19m, such as 50*50*6m.
Types and methods

Classification of Angle steels

1. According to the type, it can be divided into equilateral Angle steel and non-equilateral Angle steel
The unequal Angle steel can be divided into the unequal thickness and unequal thickness

Divide by size

  • (1) large Angle steel: side length above 12.5cm
  • (2) medium Angle steel: the edge is above 12.5cm-5cm
  • (3) small Angle steel: the side length is less than 5cm
Angle bar

Specification of Angle steel

In terms of side length and side thickness. At present, the specification of domestic Angle steel is 2-20, with the length of the cm number, the same Angle steel often 2-7 different side thickness. The actual size and thickness of both sides of the imported Angle steel shall be indicated and the relevant standards shall be indicated. Generally, large Angle steel with side length above 12.5cm, medium Angle steel between 12.5cm-5cm, and small Angle steel with side length below 5cm.
The order of import and export Angle steel is generally based on the specifications required in use, and its steel number is the corresponding carbon steel number. That is, Angle steel in addition to the specification number, there is no specific composition and performance series.
The delivery length of Angle steel is divided into two types: fixed length and double length. The selection range of fixed length of domestic Angle steel is 3 -- 9m, 4 -- 12m, 4 -- 19m and 6 -- 19m according to the different specifications. The length selection range of Angle steel made in Japan is 6-15m.
The section height of Angle steel is calculated according to the length and width of Angle steel.

Appearance quality requirement

The surface quality of Angle steel is stipulated in the standard, the general requirement must not exist harmful defect on use, be like layer, scar, crack to wait.
The allowable range of geometric shape deviation of Angle steel is also stipulated in the standard, generally, including bending degree, side width, side thickness, top Angle, theoretical weight, etc., and the Angle steel shall not have significant torsion.

Chemical composition test

Composition index: the chemical composition of Angle steel is a series of rolled steel for general structure, the main inspection index is C, Mn, P, S. According to different brands, the content varies, with the rough range of C < 0.22%, Mn: 0.30 -- 0.65%, P < 0.060%, S < 0.060%.
If you need Angle steel, please contact us and we will reply to your email in time.

评论

发表评论

此博客中的热门博文

Steelmaking Process (2)

图片
8. Refining period: The process of steelmaking is carried out by slagging and other methods to remove some elements and compounds that are harmful to the quality of steel by chemical reaction into the gas phase or discharged into the slag to remove it from the molten steel. period. 9. Reduction period: In the ordinary power electric arc furnace steelmaking operation, the time from the completion of the slag slag to the tapping is usually called the reduction period. 10. Furnace refining: The steelmaking process of refining the molten steel in the steelmaking furnace (converter, electric furnace, etc.) to another vessel for refining, also called secondary metallurgy. The steelmaking process is therefore divided into two steps: primary refining and refining. 11. Steel liquid agitation: Stirring of molten steel through refining beyond the furnace. It homogenizes the molten steel composition and temperature and boosts metallurgical reactions. Most metallurgical reaction procedures a...
阅读全文

Crane rail installation - Standards and procedures

图片
   Introduction to crane track installation With the rapid development of modern logistics, greater demands are being placed on the logistics management of machinery and equipment. This is not just about transporting bits. Once heavy machinery or equipment has arrived at a facility, it also needs to be picked up, moved and set up appropriately. For these purposes, cranes come in very handy. As cranes play an important role, crane track installation also plays an important role in these industries.  Crane track installation Techniques and standards The accurate installation of crane rails is a primary requirement for this type of heavy machinery and related industries. Selecting the most suitable track and securing it is a key issue in ensuring the integrity and longevity of the crane track system. At Yongyang , we have a reliable, skilled and experienced team to help you find the more suitable crane rails. But more on that later. Now let's talk more about crane rail inst...
阅读全文

Standard Rail: Railcar Repair | Railcar Storage | Transloading

图片
Standard Rail   is at the forefront of innovation in the railway industry, offering comprehensive solutions for railcar repair, storage, and transloading. With a commitment to excellence and efficiency, Standard Rail provides state-of-the-art facilities and expert services to meet the diverse needs of its customers.  Railcar Repair Services: Standard Rail specializes in providing top-notch railcar repair services to ensure the safety, reliability, and compliance of railcars. Its certified technicians and state-of-the-art facilities offer a wide range of repair and maintenance solutions, including: Mechanical Repairs: Comprehensive mechanical repairs for railcar components such as wheels, brakes, couplers, and suspension systems. Structural Repairs: Welding, fabrication, and structural repairs to address damage or wear on railcar bodies, frames, and undercarriages. Tank Car Services: Specialized services for tank cars, including cleaning, inspection, lining, and pressure testin...
阅读全文